Render of what was expected 
Bracket to hold the containers 
Jig to drill holes in the caps
I wanted to store a full E24 through-hole resistor set (and a few other common components), and after looking at different solutions, I decided to go with cheap containers and make something nice out of them. Each peanut butter container has all multiples on one value (ie, R10 has 1ohm, 10ohms, 100ohms, 1kohm, 10kohm, 100kohm, and 1Mohm). Works well, and every container is rigidly screwed to the base, so no accidents and not as much dust.
